QSC Q-SYS TSC-8-WH Manual de usuario Pagina 1

1™Touchscreen Hardware User ManualTSC-3-WH – Networked Touchscreen Controller (White)TSC-3-BK – Networked Touchscreen Controller (Black)TD-000343-00-A

10Mounting the Surface-Mount Back BoxThis procedure covers mounting the Surface-Mount Back Box onto an electrical connection box, and the Mounting Bra

11Mounting the Mounting Bracket to 5/8" DrywallThis procedure uses the two Drywall Clamps, one on the top, one on the bottom, of a rectangular ho

12Computer Requirements & Software InstallationConfiguration of the TSC-3 requires a Q-Sys Core and a PC running Q-Sys Designer software, both conn

13Using the TSC-3 TouchscreenFor the most part, using the TSC-3 depends on the design created for your installation by your system designer. There are

14TSC-3 Dimensions.— Figure 13 — 3.58 in.90.8 mm2.71 in.68.8 mm1.62 in.41.1 mmCL4.50 in.114.2 mm4.83 in.122.7 mm2.72 in.69 mm.36 in9.1 mm.96 in24.4 mm

15TSC-3 SpecificationsFront Panel Controls Control surface 3.5 inch (89.9 mm) capacitive touch surfaceDisplay LCD 3.5 inch (89.9 mm) 4:3 color graphic

Mailing Address:QSC Audio Products, LLC1675 MacArthur BoulevardCosta Mesa, CA 92626-1468 U.S.Main Number: (714) 754-6175World Wide Web: www.qscaudio.c

2EXPLANATION OF TERMS AND SYMBOLSThe term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result

3FCC StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru

4RoHS STATEMENTThe Q-Sys TSC-3-BK and TSC-3-WH products are in compliance with European Directive 2002/95/EC – Restriction of Hazardous Substances (Ro

5IntroductionQ-Sys™ is a platform of software and hardware products that provide the system designer and system operator with all the tools necessary

6The Q-Sys Q-LAN NetworkThe Q-Sys solution is designed to be deployed on QSC’s high performance Q-LAN network. Q-LAN is a proprietary network implemen

7UnpackingThere are no special unpacking precautions. However, it is recommended that you keep the original packing materials for reuse in the rare ev

8Mounting the Mounting Bracket to a 2-Gang Electrical Box - New ConstructionThe new-construction, 2-gang box should be installed in the wall, during c

9Mounting the Mounting Bracket to a 2-Gang Electrical Box - Old ConstructionThere are a number of manufacturers of old-construction 2-gang electrical