QSC DSP-30 Manual descargar pdf (Pagina 19)

Use: RS-232 Pinout

Pin Signal Description

1 DCD

2 TD

3 RD

4 DTR

5 GND

6 DSR

7 RTS

8 CTS

9 Contact Closure

RS-232 Pinout:

The diagram below shows the pin assignments for the female RS-232 connector on the DSP.

*Note! Pin 9 is used for contact closure input. This pin is not normally used by RS-

232 devices. Some laptop and desktop computer COM ports have been observed to

“pull” pin 9 to ground; this will cause unexpected behavior of the contact closure

function if pin 9 is not disconnected on the PC end of the cable. If this behavior is

observed, make sure that pin 9 is disconnected on the PC end of the cable.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sin comentarios

QSC DSP-30 Manual Pagina 19